AutoShift®/UltraShift Gen3
TRSM0930 EN-US
|
June 2022 - A

Cobra Lever

Special Instructions

None

Special Tools

  • Basic hand tools

Component Identification

_Graphics/LineArt/trsm0930p64a.png

1. Tower

2. Screw

3. 8-Way Cobra Lever Harness Connector

Removal

  1. Using a Phillips screwdriver, remove the 4 screws from the Cobra Lever housing.

    _Graphics/Web/trsm0930p44a.jpg

  2. Disconnect the 8-way Cobra Lever Harness connector and remove the Cobra Lever from the housing.

    _Graphics/Web/trsm0930p44b.jpg

Installation

  1. Connect the 8-way Cobra Lever Harness connector and place the Cobra Lever into the tower.

    _Graphics/Web/trsm0930p44b.jpg

  2. Using a Phillips screwdriver install the 4 screws into the Cobra Lever housing.

    _Graphics/Web/trsm0930p44a.jpg