Endurant HD
TRSM0950 EN-US
|
December 2024 - A

Roadranger Specialty Tools

Note: Available for purchase at www.klineind.com or contact K-Line at 1-800-824-5546.

Transmission Jack Adapter Plate (RR1067TR)

Clutch Installation Tool Kit (RR2000CL)

  • Clutch Alignment Shaft (RR1087TR)
  • Alignment Pins (x2) (RR1063TR-3)
  • Stand-off Bolts (x4) (RR1063TR-4)

Basic Service Repair Kit (RR2010TR)

  • Input Shaft Pilot Bearing Wear Sleeve Puller (RR1062TR)
  • Wear Sleeve Installer (RR1061TR-1, 2)
  • Inertia Brake Piston Seal Installer (RR1074TR-1, 2)
  • Output Seal Driver (RR1001TR-8)
  • Countershaft Pilot Tool, Lower (RR1071TR)
  • Countershaft Pilot Tool, Upper (RR1072TR)
  • Range Assembly Removal and Installation Tool (RR1065TR)

Electrical Diagnostic Kit

  • Eaton Breakout Box with 74-Way Eaton Diagnostic Adapter (RR1029TR)
  • 3-Way Eaton Diagnostic Adapter (RR1060TR)

Mechanical Diagnostic Kit (RR2011TR)

  • MTM Alignment Tool (RR1086TR-1)
  • Confirm-Neutral Gauge (RR1086TR-2)
  • Rail B Engagement Tool (RR1088TR)

Input Shaft Cup (RR1085TR-6)

Front Bearing Capture Plate (RR1085TR-7)

Input Shaft Press (RR1085TR)

Note: The input shaft is required to be pressed in and out of the clutch housing. Input Shaft Press (RR1085TR) can be purchased if the clutch housing does not properly fit the available press.

Overhaul Tool Kit (RR2012TR)

  • Input Shaft Bearing Removal and Installation Tool (RR1075TR)
  • Countershaft Bearing Installer (RR1076TR)
  • Main Shaft Bearing Installer (RR1077TR)
  • Output Shaft Installer/Input Shaft Seal Driver (RR1070TR)
  • Universal Driver Handle (OE8044-T0)
  • Rear Housing Stand (RR1069TR)
  • Input Shaft Stand (RR1073TR)

    Note: The Input Shaft Stand may have already been purchased with Overhaul Tool Kit (RR2012TR)

Overhaul Tool Kit #2 (RR2013TR)

  • Rear Alignment Pins (2) (RR1090TR)
  • Output Bearing Install and Removal Tool (RR1089TR)
  • Reaction Plate Install and removal Tool (RR1091TR)

Output Seal Driver Kit (RR1001TR)

  • Output Seal Driver Handle (RR1001TR-2)

Note: The Output Seal Driver Kit (RR1001TR) may have already been purchased to support prior transmission models.

Input Bearing Driver (RR1049TR)

Note: The Input Bearing Driver (RR1049TR) may have already been purchased in Procision Level 1 Service Kit (RR2000TR).

Note: The input Bearing Driver (RR1049TR) only needs to be purchased and used if the clutch housing does not properly fit the available press.

20-Way Eaton Diagnostic Adapter (RR1030TR)