Eaton Push Button Shift Control Device (PBSC)
Special Instructions
The exact location varies depending on vehicle manufacturer.
Special Tools
- Basic hand tools
Component Identification
 |
1. Nut 2. Washer 3. 30-Way Push Button Shift Control Device (PBSC) Connector 4. Backing Plate 5. Eaton Push Button Shift Control Device (PBSC) |
Eaton Push Button Shift Control Device (PBSC) Removal
Using a 1/4" socket, loosen the retaining bolt and disconnect the 30-way connector from the back of the Shift Control.
Using a 11/32" wrench, remove the 2 nuts and lock washers from the back of the Shift Control and remove the Shift Control.
Note: Shift Control location and use varies with each truck.
Eaton Push Button Shift Control Device (PBSC) Installation
Install the Shift Control in the mounting location. Then, using a 11/32" wrench, install the 2 lock washers and nuts and tighten to 14–16 lb-in (18–21 N•m).
Using a 1/4" wrench, reconnect the 30-way connector to the back of the Shift Control and tighten to 10 +/- 3 lb-in (13.5 +/- 4 N•m)