Remove the 16 cap screws and studs fastening the Shift Bar Housing to the Transmission Case. Remove the Shift Bar Housing.

Ensure all Transmission Main Case Main Shaft Sliding Clutches are in their Neutral position.

Ensure that the Main Case and Shift Bar Housing gasket surfaces are clean and free of debris.

Apply Loctite 5810F RTV or anaerobic 5188 sealant to the Shift Bar Housing gasket surface and install the Shift Bar Housing.

Note: Follow the pattern in the image below. Parts must be assembled within 30 minutes of applying sealant. The area must be clean of contaminants, ensure surfaces are adequately prepped.

Install the Shift Bar Housing onto the Transmission Main Case.

Install the 16 cap screws that fasten the Shift Bar Housing to the Transmission Main Case. Torque cap screws to 35–45 lb-ft.